Ensuring Gun Safety at Home

In this day and age of innovations, a lot of gun and gun equipment makers are finding different ways on how to improve ammo quality. Gun equipment, such as scopes and sights, are becoming more and more sophisticated. Suppressors are becoming more and more efficient in silencing guns. In fact, several gun makers, including Suppressed Weapon Systems, have been successful in integrating suppressors with barrels for quieter shots and lesser recoil. Ear plugs and muffs are also becoming better when it comes to ear protection.

But along with this range of developments, gun owners should also improve on how to ensure gun safety at home. In the U.S., more than one third of the household owns a gun, making it a real and constant threat especially among children. Here are some simple reminders that can help you keep your house gun-safe.

Talk to them about gun safety

Keeping a gun at home is normal for some families, even when there are kids around. However, not talking to your kids about how dangerous guns are is not. Take time to talk to your kids about how deadly guns are, and how they should act whenever they see a gun that is unattended.

Do not forget the basics

Although keeping your gun out of reach of kids is a must, there are a couple of more things you can do to ensure gun safety at home. For instance, you should take the ammunition out of the gun when storing it to make your home gun-safe. Gun equipment and cleaners should also be locked up to avoid accidents. Leaving the gun unattended when cleaning or in use also pose a threat to your kids, so be sure not to leave it alone.

Invest in gun safes

Storing your gun beneath stacks of shirts in one of your closets is not safe-keeping. Store your gun in safes or cases equipped with combination or key lock. There are even some safes that need your palm scan or fingerprint to open, but could be costlier to buy.

Tags

Related Posts

Share This

Choosing the Right Commercial Roofing Materials

The type of material used for commercial roofing will depend on several factors, including but not limited to the weather, type of roof, and the budget. A professional roofing contractor can recommend the best materials for each case. Below are the most common materials used in commercial buildings and in some instances for residential structures.

Asphalt Shingle

Comparatively inexpensive and simple to install, asphalt shingles are perhaps the most widely used roofing material in the US for both commercial and residential purposes and can last for up to 30 years. Laminated asphalt shingles come in various textures and colors and can last for up to 50 years.

Slate Shingle

A much more expensive and somewhat fragile alternative to asphalt shingles, slate shingles are chosen for the esthetic quality they add to any commercial or residential building. While they are breakable, slate shingles can last up to 100 years if they are properly installed by professional roofing contractors such as Black Slate Roofing, LLC.

Tile

Tiles are typically heavier than other roofing materials, and require more robust support. They can last up to 50 years before needing replacement.

Metal

Metal roofing materials are quite common as well, and are usually a more cost-effective alternative to shingle or tile roofing materials except for copper. It stands up well to extreme weather but is vulnerable to damage during hail events unless it is covered with a granulated layer. Typically, metal roofing will last up to 50 years.

BUR

Built-up roof or BUR consists of multiple layers of roof felts and bitumen, topped with a protective component such as a cap sheet, asphalt, or gravel. It is usually only used in commercial roofing.

EPDM

Typically used in commercial low-slope roofs, Ethylene Propylene Diene Monomer or EPDM is rubber and is comparatively inexpensive and easy to install. The expected lifespan of this material is between 12 and 25 years.

Modified Bitumen

Commercial roofs with a minimum slope of ¼ inch per horizontal foot can be made of modified bitumen, asphalt that has been chemically altered to acquire plastic properties. It works best in combination with BUR.

Single Ply

These are synthetic materials produced in smooth, flexible sheets that are ideal for a flat roof. It is not usually recommended for a roof with a slope of more than 2 inches per horizontal foot unless an adherent is applied.

Tags

Related Posts

Share This

New Automobile Safety Features to Watch out for

Every time you get behind the wheel of a car, you take a risk. Not only are drivers responsible for paying attention to and following laws and traffic regulations, but they must be ready for unexpected road hazards and vehicle failures. Drivers must also watch out for reckless motorists and people under the influence of drugs and alcohol. Even the safest, most careful driver can easily become overwhelmed by the vast number of road dangers.

Fortunately, automakers are doing their best to make cars and roadways safer—here is a short list of new automobile technologies that consumers can expect to become commonplace in the next few years.

Night vision

Employing advanced thermal and infrared technology, night vision systems enable cars to spot road hazards such as animals or pedestrians long before the car’s headlights illuminate the dangerous portion of the road. Night vision technologies promise to give drivers a few extra moments to brake, decreasing the number of nighttime accidents.

Warning systems

Distracted drivers cause numerous accidents each year, from motorists using cell phones to tired drivers making lengthy road trips. Several automakers are already pioneering warning systems that monitor the car’s position within the lane using light sensors, and alert drivers if their car is veering and swerving. Some warning systems even briefly take control of the car if the driver does not respond, and swing the vehicle back into place.

Blind spot detection

Utilizing sensors or cameras, a blind spot detection system can warn drivers of cars in their blind spots when they are about to switch lanes.

It’s difficult to predict the full effect of new vehicle safety technologies, but in all likelihood they will reduce the disastrous effects of distracted driving and prevent some of the tragic accidents that occur so frequently on American roadways.

However, should any of these safety features prove to be defective, the consequences can be disastrous. Car accidents caused by malfunctioning automobile parts, especially those that drivers depend on such as brakes and accelerators, can result in fatal accidents. It is difficult to imagine the impact that a defect in a safety system would have, as that would depend on the kind of system, but it is plain to see that any type of malfunction can lead to a driver making an erroneous decision that could end in an accident.

According to the website of Habush Habush & Rottier S.C. ®, if such an injury occurs, a person is allowed to file a car accident lawsuit against the automaker.

Tags

Related Posts

Share This